Boot Camp 5.1 includes several Mac drivers so that Windows will recognize your trackpad, Thunderbolt, USB 3.0, the iSight (or FaceTime) camera, the Eject key on the Mac keyboard, networking, audio, graphics, and so on. A Boot Camp Control Panel for Windows and an Apple Boot Camp system-tray item will be added. Finally, press 'Return' key on the selected option to boot Mac. This way you can boot your Mac with an external USB drive, but the most critical part is to prepare the USB drive. If you have multiple USB drives connected, then the Startup Manager shall list the drives with the bootable OS. So, this is how to boot Mac from USB drive. You will need to have a USB drive with a storage capacity of 16 GB or more for this method to work. You can use the following steps to know how to make a Windows 10 bootable USB on Mac using Bootcamp Assistant. After inserting the USB drive into your Mac system, launch 'Boot Camp Assistant'. Some Mac users may wish to create a bootable MacOS Catalina installer drive, typically using a USB flash drive or with another similar small boot disk. Bootable USB installers offer an easy way to upgrade multiple Macs to macOS Catalina, to perform clean installs of MacOS Catalina, to perform maintenance from a boot disk like formatting disks.
- 1. Mac Files Tips
- 2. Mac Software
- 3. Mac Storage Tips
- 4. Mac Troubleshooting
- 5. Mac OS
- 6. Mac Error
by Jenefey AaronUpdated on 2020-01-10 / Update for OS X
You may need to boot up your Mac using an external drive or boot volume once in a while, rather than using a start up disk. Booting with an external disk has a lot of significance. Maybe you want to troubleshoot some problems, repair the disk, do partitions, format the entire disk, update, and install OS X etc. All these are executed perfectly when you use an external boot volume to boot up your Mac. In this article, we are here with the detailed step by step guide on how to boot Mac from external hard drive easily. So, let's get started… https://yyddjp.over-blog.com/2021/01/keka-free-mac.html.
Part 1: How to Boot Mac from USB Drive/CD/DVD
Actually, it is possible to boot Mac from external drive or a hard drive, but there are a few specific requirements needed for your Mac to become eligible for that process.
- First, you have to have an Intel-Based Mac.
- Second, the CD or DVD you are using to boot must contain Apple's Super Drive or if you are using a USB drive then it should be formatted with GUID Partition, and you are also required to install OS X installer. Apple is against booting Mac from an external storage device, because you may install an older version of OS X than the one you were using.
Boot from CD or DVD:
If you want to boot your MacBook/Air/Pro/iMac from an optical media like CD or DVD you need to follow the steps below:
1. Open your Mac or restart the device if you were already using it.
2. When the startup music is playing press and hold the 'C' key from the keyboard.
3. This will start the OS X installer from the CD/DVD on your Mac.
So, it is not too complicated to Mac boot from CD/DVD. You can easily burn a bootable image of OS X on a DVD by using Disk Utility.
How to install mac on windows pc. Boot from External USB:
Using your USB drive to boot Mac is not as simple as you think. You need to prepare your USB drive beforehand for this specific purpose. You have to format the USB drive and insert the proper Operating System, which is OS X.
1. Turn on your Mac.
2. As soon as the startup music begins you need to press and keep holding the 'Option' key.
3. After that release that key, the Startup manager will be launched.
4. Startup Manager will begin scanning your device and you will be provided with a list of devices that are connected to your Mac.
5. Now, select the drive you want to use with your mouse.
6. Finally, press 'Return' key on the selected option to boot Mac.
How To Fix Corrupted Mac Boot Drive
This way you can boot your Mac with an external USB drive, but the most critical part is to prepare the USB drive. If you have multiple USB drives connected, then the Startup Manager shall list the drives with the bootable OS. So, this is how to boot Mac from USB drive.
Part 2: Common Problems and Fixes When Boot Mac from External Drive
https://ameblo.jp/2myorosur-bu2h/entry-12649879343.html. You may face several issues during MacBook Pro Boot from USB or any external drive. So, a few FAQs are mentioned below which may help you when you are facing any difficulties.
- 1. Have you tried connecting to a different USB port?
- 2. Have you formatted the USB drive with GUID partition?
- 3. Is your Mac shutting down after connecting the disk?
- 4. Is your Disk needs repair?
- 5. Have you connected the USB drive properly?
If you are unable to startup the installer after connecting the USB drive to your Mac, then first you should try connecting it to a different USB port. https://osayyo.over-blog.com/2021/01/terraria-13-53-mac-download.html. It may fix the problem.
If you are having problems with your USB storage device then you need to make sure that if you have properly formatted the drive with GUID partition. You have to do it properly otherwise the Intel-Based Mac won't start.
Actually, the MacBook contains a preventive measure and because of that computer shuts down automatically when a damaged USB drive is connected or if the USB port itself is damaged.
If your Mac fails to boot from an external drive even though you have properly installed the OS X installer, then maybe your disk is damaged. You should open Disk Utility and ask permission to repair disk.
There are two types of Apple keyboards, Wired and Wireless. There are also some keyboards with inbuilt USB ports but they may not have enough power to run the drive.
So, this is how to startup Mac from external drive. Follow the frequently asked questions to clear any doubts that you have while booting from external hard drive Mac.
In case, you want to recover any lost or deleted Mac files after a boot, we highly recommend you to go for Tenorshare Any Data Recovery for Mac. It is a utility data recovery tool capable of recovering any type of data from Mac with ease. Go for it!
- Recover data deleted, formatted or lost on Mac;
- Restore files from hard drive and external storage devices;
- Recover data from failed/crashed/dead MacBook;
- Fully supported latest macOS 10.15 Catalina;
If you're using both Windows and macOS, you've to deal with when mac refuses to boot. The reason behind can be from a number of things that could go wrong. This includes system failure, bad updates, power failure, hardware failure. Unless there is a hardware problem that only can be diagnosed at the apple center you can fix your Apple computer.
It is an excellent practice always to have a bootable macOS USB, which you can easily create using macOS operating system. But since we're here, you probably can want to make bootable USB using Windows 10. Let's be real, and there are more Windows computers compared to MAC. Fortunately, you can use a Windows computer to create a bootable USB flash drive.
https://ameblo.jp/2conscolpol-me48/entry-12649880547.html. In this article, we'll help you with the instructions to create a bootable MacOS USB installation media from a Windows 10 computer. So that you can use that USB to install or reinstall (upgrade) Apple's MacOS. You can create a macos Catalina/sierra bootable USB using this guide to fix your operating system.
What's needed?
You will need a few things before you get started. The first essential thing in it is a USB drive would be awesome if you use a USB 3.0, but you can get the work done using slow USB as well. So, in contrast, you need these following things.
- One high-quality USB flash drive with 16GB of storage.
- TransMac software.
- MacOS operating system image (DMG file).
How to Create a macos Catalina bootable usb
The guide is simple and straightforward if you follow thiese step.
Download and install TransMac on your Windows PC. It's paid software with 15-day trial, so you can use it within the time to create a bootable MacOS USB flash drive. If you like the software and to support the developer you can buy the full version.
Plug the USB drive to your Windows computer that you'll be using to fix your MacOS. And we are going to tell you something straightforward – backup if things stored in USB Drive.
Step 1. Open the TransMac, and select Run as administrator. If you're using the trial version, wait 15 seconds, and click Run.
Step 2. Use your USB drive right-click on it and select format disk format this will format the USB drive so that it can be used to store the Mac OS operating system. One thing you need took care of that the USB drive needs in GPT partition in order to work on a Mac computer otherwise it won't boot.
When it prompts select a name for your USB it doesn't matter but just do it and click ok. If the formatting completed successfully, click OK to continue.
Step 3. Again from the left sidebar right-click on the USB drive and select restore with disk image.
Step 4. Now browse to the location where the Mac OS system image file is located and click ok to load it.
Step 5. Click Yes to create the macOS USB bootable media.
It will take a few minutes to complete the process because the Mac Operating System is larger than any other operating systems like Windows and LINUX in size. Now plug the USB drive to Mac computer in order to install, install or upgrade the operating system to the latest version of Mac OS, which can be Sierra or later.
THE TOOL CAN
- Apple File System (APFS) volume read support.
- Open Mac APFS/HFS/HFS+ format disk drives, flash drives, CD/DVD/Blu-ray media, HD floppies, dmg, dmgpart, sparsebundle and sparseimage files.
- Copy files to Mac HFS+ disks and dmg images.
Format as HFS+ for Mac . - Save and restore images of disks and flash drives.
- Create, compress, expand and split dmg files.
- Built in burner functionality to burn ISO and dmg files directly to CD/DVD/Blu-Ray.
- Read Mac multisession and hybrid CDs.
- View partition layout.
How to create a GPT partition on a USB flash drive
If the USB flash drive is not working using TransMac, it could be still a partition problem. In this case, you want to redo the entire process again, but this time use the following steps to use the Diskpart command-line utility on Windows to create the appropriate GPT partition.
- Open Command Prompt as an administrator. Type cmd in run dialog or open it from the start menu.
- Type the diskpart command and press Enter. This will display that is connected to your computer.
- Enter the list disk command to view all drives connected to your computer and press Enter. This command will show all of the partitions inside of a disc.
- Type the select disk command followed the number assigned for the USB flash drive (e.g., select disk 4), and press Enter. This command will select the disc partition of your choice.
- Enter the clean command and press Enter. This erases and formats the disc.
- Type the convert GPT command and press Enter. This convert master boot record to new GPT.
- Enter the create partition primary command and press Enter to complete the process.
Quickly create a macOS bootable USB on Windows
Now make bootable USB using the TransMac software (follow instructions that are given above). Now connect the USB and power on your Mac computer while holding the option key and then select the USB Flash media to run the installation.
Mac Os Boot Disk Download
Learn using USB on MAC (Apple support page)
Learn more about making bootable USB.
Make Mac Boot Drive
Contents
