Therefore, you can create bootable USB for your Mac using Transmac on windows 10/7/8/8.1 here you will learn the easiest method of creating bootable USB. As you know that Mac OS EL Capitan is the newest version among Mac. In here just follow my steps to create a bootable USB installer for your Mac. Is the twelfth major of the Mac operating system. Now, close the Command Prompt and open VirtualBox on your computer. Select macOS 10.2 Sierra and click on Start after a couple of seconds your Virtual Mac machine will be started. Go ahead and set up your virtual Mac machine. After the set up your Virtual Mac with Mac OS sierra is ready to use. Now your Mac OS X Virtual Machine is.
Most of the people in the world have Windows based machine. I also have the same. I am using Windows for about 15 years and I got bored with the same.
Then I thought of using Mac but those are pretty expensive out here. So I was thinking if we can install Windows on any custom build hardware then why can't OS X? Then I searched about it on internet a lot and I do found a way to do same too but problem is that all the guides of installing OS X on PC are done with the help of Mac. So if I had Mac then why would install it on anything other.
I have gathered information from various guides and tutorials at internet and prepared an easy and simple method to install OS X on Windows PC without the help of Mac. So follow the guide below if you want to create a hackintosh system.
Note: All the processes can even damage your hardware so be careful and do it on your own risk. Installing Mac OS X on other hardware is against company's policy unless you bought a retail DVD for the same.
Requirements
Before we start installing OS X in your PC you need following stuff without which it is impossible to do so.
Hardware
If you want to install OS X on your PC then you need to have compatible hardware too because this makes the difference in this guide. If you are going to buy a whole new hardware or you want to check whether your hardware is compatible or not then check out this link. It has detailed guide for the same.
OS
Download Mac Os To Pc
You need to buy OS X retail DVD and a blank rewriteable CD.
Procedure
As you have the required stuff we will now begin with the guide.
Boot Disk
First of all you need to create Boot disk or USB Drive which will allow you to install OS X into a DVD or a USB drive directly. To create the image, use any software available on internet such as the free Unibeast. The Mac program will modify the official OS X installer and then install it on a USB drive. Then you will use the USB drive to run on a PC.
Configure your Bios
Now you need to configure Bios of your system. Enter the Bios setup of your machine. Now you need to alter setting of three categories as shown in picture below.
First head over to Advanced Bios Feature, in that choose first boot option to CDROM. Then in Integrated peripherals, switch the SATA and On-board SATA/IDE Ctrl Mode to AHCI mode. Now in Power management Setup, make HPET mode to 64-Bit.
Install OS X
- First of all insert the boot USB drive which we created above.
- As soon as you see this screen, eject the USB drive.
- Now you can start following instructions and install Mac OS X.
- If you succeed then language selection option appears. So select the preferred language.
- Now you we see partition option, click on Utilities then Disk Utility and select your required Drive and click on partition.
- Give a name to the drive and choose Mac OS Extended as format option.
- Then you will see 'options' click on that and select GUID Partition Table and click on OK.
Boot Loader installation
Now when you will boot your system you will see an error for sure. So insert Boot USB drive which we created above and restart the system. Now you see the option with the same name you gave above. Select that and press enter.
Now after the first setup just go to Safari and download tool named Multibeast. Save it as 'DSDT.aml'
Launch Multibeast and do the required settings. It will be different for each system as you will have different hardware for sure. After the whole process, eject Boot USB drive and restart the system. And it's done.
Now you can enjoy Mac OS X on your Windows PC. So which things you did first after installing Mac OS X. Do tell us in comments below.
Disclosure: As an Amazon Associate, I earn from qualifying purchases. The commission help keep the rest of my content free, so thank you!
If you're still using a Mac OS X the time will come when your computer won't boot, or a problem may arise where you can't take control of the device, and booting from an OS X installation media will be required.
This is why it's recommended that you make a Mac OS X bootable USB when your Mac is in working conditions. However, if you find yourself on a scenario where your device (iMac, MacBook Pro, Air, Mac Pro or Mini) is not responding and you happen to have a Windows 10 device, then you can still be able to make a USB bootable installation media for your Mac OS X to reinstall the operating system using the Recovery Assistant.
These instructions will also work for Windows users who are running Mac OS X on a virtual machine and need to upgrade to the latest version. For instance, to OS X Yosemite.
Requirements
Before you dive into this guide, you'll need a few things:
- A broken Mac computer with Mac OS X.
- A trial copy of the TransMac software.
- One high quality USB flash drive with 16GB of storage.
- A copy of Apple's macOS (DMG file).
Now that you have all the necessary ingredients, you're ready to make a Mac OS X bootable USB using the DMG file of the operating system with the steps below.
Create Mac OS X bootable USB installation media
Before you can use TransMac, you first need to partition your USB flash drive with a GPT partition, as a normal MBR partition may not work. To do this, you'll need to use the Diskpart command-line utility on Windows 10.
Setting up GPT partition
Use these steps to set up a USB drive with a GPT partition:
Open Start on Windows 10.
Search for Command Prompt, right-click the top result and select the Run as Administrator option.
Type the following command to open Diskpart and press Enter:
Best golf game for mac 2019. Type the following command to determine the USB flash drive and press Enter:
Type the following command to select the storage and press Enter:
Quick tip: Theselect disk 1command as an example, but you have to replace 1 with the number of the flash drive you want to use.Type the following commands to delete everything from the USB thumb drive and press Enter: Median xl shrine crafting.
Type the following command to convert the drive into a GPT partition and press Enter:
Type the following command to select the new partition and press Enter:
After you complete the steps, the USB flash drive from MBR to GPT format, you can use the steps below to create a bootable USB installation media to install Mac OS X.
Create USB install media
Use these steps to create a bootable media to install Mac OS X:
Download and install a copy of TransMac.
Quick note: TransMac is a paid software, but it has a 15-day trial solution, that give us more than enough time to move the DMG files to the USB drive from Windows. (If you want to support the developer, you can purchase the full version.)Insert the USB drive that you'll use to fix your installation of OS X. (Remember that all the data in the USB will be erased. Make sure you take off any important documents.)
Right-click the TransMac software icon and Run as administrator. (You'll be prompted to Enter Key or Run, because we'll be using it once, click the Run option.)
On the left pane, you'll see all the Windows PC drives listed, right-click the USB drive that you're intending to use to reinstall Apple's OS X and select the Restore with Disk Image option.
In the warning dialog box, click the Yes button.
Use the Restore Disk Image to Drive dialog box to browse for the DMG file with the installation files for Mac OS X Yosemite in this case, and click the OK button to create a bootable USB of the operating system.
Now, you'll have to wait a long time. No kidding. It could take one or two hours to complete the process depending on your computer and other variables.
https://nisberssusuff1970.mystrikingly.com/blog/a-text-2-35-5-4. Once your bootable USB installation media is ready, remove it and insert it into your Mac, power it on, holding down the Option key, and select the USB you just created to reinstall Mac OS X.
How To Get Mac Os On Windows
If you're having issues trying to create a bootable media, you can get a USB flash drive that comes with Mac OSX ready to install.
